Sys*Stim 208A Low Volt Muscle Stimulator
Product Description
Mettler Sys*Stim 208A Low Volt Muscle Stimulator
The Sys*Stim 208A is a two-channel, low-volt stimulator with Surge, Pulse, Tetanize and Reciprocation modes. It has easy to-operate knobs that control stimulation intensity and frequency, a digital timer and a remote patient cut-off switch. It is a small, portable stimulator with a clinical appearance. The microprocessor controlled unit allows for a smooth comfortable waveform. The digital timer is visible from all angles of the room. Intensity control knobs allow the clinician to increase or decrease intensity in small increments allowing for better control and comfort.
Features:
Input: 100 - 240 volt AC 50/60 Hz, 0.75 Amp (max)
External Fuse: 0.75 A, 250 V, Slow Blow
Weight: 1.5 lbs
Dimensions: 2.5 in (H) x 6 in (D) x 8 in (L), (6.3 cm (H) x 15 cm (D) x 20 cm (L))
Max Treatment Time: 60 minutes
Channels: Dual
Wave Form: Asymmetrical bi-phasic with zero net DC
Voltage: 110 V Peak into a 1 k ohm load; 28 V peak into a 100 ohm load
Intensity: 56 ตC max per pulse into a 100 ohm load
Phase Duration: 200 ตs at 50% max amplitude
Frequency: Pulse mode = 1 - 80 Hz; Tetanize Mode = 80 Hz; Surge Mode = 80 Hz; Reciprocal Mode = 80 Hz
Surge Cycle: 0.5 on/off to 3.75 on/off
Includes: One package V Trode 2" diameter electrodes; two dual cord sets; two pin to banana adapters; one patient cable; one detachable UL listed, hospital-grade line cord; and an instruction manual.
The Sys*Stim 208A is a two-channel, low-volt stimulator with Surge, Pulse, Tetanize and Reciprocation modes. It has easy to-operate knobs that control stimulation intensity and frequency, a digital timer and a remote patient cut-off switch. It is a small, portable stimulator with a clinical appearance. The microprocessor controlled unit allows for a smooth comfortable waveform. The digital timer is visible from all angles of the room. Intensity control knobs allow the clinician to increase or decrease intensity in small increments allowing for better control and comfort.
Features:
Input: 100 - 240 volt AC 50/60 Hz, 0.75 Amp (max)
External Fuse: 0.75 A, 250 V, Slow Blow
Weight: 1.5 lbs
Dimensions: 2.5 in (H) x 6 in (D) x 8 in (L), (6.3 cm (H) x 15 cm (D) x 20 cm (L))
Max Treatment Time: 60 minutes
Channels: Dual
Wave Form: Asymmetrical bi-phasic with zero net DC
Voltage: 110 V Peak into a 1 k ohm load; 28 V peak into a 100 ohm load
Intensity: 56 ตC max per pulse into a 100 ohm load
Phase Duration: 200 ตs at 50% max amplitude
Frequency: Pulse mode = 1 - 80 Hz; Tetanize Mode = 80 Hz; Surge Mode = 80 Hz; Reciprocal Mode = 80 Hz
Surge Cycle: 0.5 on/off to 3.75 on/off
Includes: One package V Trode 2" diameter electrodes; two dual cord sets; two pin to banana adapters; one patient cable; one detachable UL listed, hospital-grade line cord; and an instruction manual.
